High Quality Self Leveling Cement, Self Leveling Adhesive, Self Leveling Primer Suppliers in China

Home > Products > Self Leveling Cement/Adhesive/Primer > High Strength Self Leveling Compound Concrete Click PVC Floor Cement

High Strength Self Leveling Compound Concrete Click PVC Floor Cement

Basic Info

Model No.:  DST-M518

Product Description

Model NO.: DST-M518 Strength Grade(Mpa): 30 Hardening Feature: High Fluidity Heat of Hydration: Moderate Heat Quality Guarantee Period: 6 Months Transport Package: 25kg/Bag Type: Composite Portland Cement Mineral Composition: Fine Aggregate and Spray-Dried Dispersible Polymer Function: Self Leveling Cement Color: Grey Trademark: DavidSnow Origin: Guangdong China High Strength Self Leveling Compound Concrete Cement
    This product is produced with excellent formulation using special cement ,fine aggregate and spray-dried dispersible polymer powder and special additives. It is an ideal self-leveling material with high fluidity and plasticity, which is  widely used to the heavy commercial buliding and industry place. Features of performance: 1. High fluidity, is capacity to extend service life and decorative effect of various floor covering 2. Easy to apply, quick setting, various floor-covering materials can be applied after short time. 3. High compressive and the tensile strength and alkali resistance. 4. Economical and practical Technical Specification
Item Requirement
Appearance Grey powder
Fluidity(cm) ≥13
Working Time About 20min
Compressive Strength (MPa)≥30(after 28days)
Split Strength (MPa)≥6.0(after 28days)
Application temperature 5-30ºC
Quality Guarantee Period 6months
Theoretical application rate 1.5kg/m2
the mixing ratio 25kg cement : 6.5kg water
Application Instruction:       The surface should be clean, dry and strong without loose part. The substrate should be cleaned thoroughly. Before application of the compound the substrate should be applied by proper primer. When the primer is absorbed and the substrate is in a half-dry state, Start self leveling construction . First, mix the product with water in the mixing ratio of self-leveling cement: water=25:6.5kg. The mixing method is: pour clean water into a suitable container, then add self-leveling cement while stirring vigorously until uniform viscous mixture is formed. Pour the mixture on the area to be applied, spread the material uniformly to required thickness using toothed rake (range of thickness is 1-4mm).The mixture must be finished in 20min. It is the next step to remove entrance air by particular roller. Various flooring materials can be applied on it after dry. Notice: The product should be protected against frost and direct sun light during transportation, storage and application. Application temperature should not be lower than 5ºC. Safety and Health: The product is environment-friendly product. It is doesn't contain formaldehyde, chloride or aromatic hydrocarbon and heavy metal such as lead, mercury, cadmium at all. It is safe and nontoxic;therefore it belongs to non-hazardous goods.

Contact us if you need more details on Click PVC Floor Cement. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Self Leveling Compound Concrete、Self Leveling Compound Cement. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Self Leveling Cement/Adhesive/Primer

Email to this supplier
  • *Subject:
  • To:

  • *Messages:
    Your message must be between 20-8000 characters