High Quality Self Leveling Cement, Self Leveling Adhesive, Self Leveling Primer Suppliers in China

Home > Products > Self Leveling Cement/Adhesive/Primer > High Fluidity and Plasticity Self Leveling Cement for Vinyl Flooring

High Fluidity and Plasticity Self Leveling Cement for Vinyl Flooring

Basic Info

Model No.:  DST-M518

Product Description

Model NO.: DST-M518 Strength Grade(Mpa): 22 Hardening Feature: High Fluidity Heat of Hydration: Moderate Heat Quality Guarantee Period: 6 Months Transport Package: 25kg/Bag Type: Composite Portland Cement Mineral Composition: Fine Aggregate and Spray-Dried Dispersible Polymer Function: Self Leveling Cement Color: Grey Trademark: DavidSnow Origin: Guangdong China High Fluidity and Plasticity Self Leveling Cement For Vinyl Flooring
  This product is produced with excellent formulation using special cement ,fine aggregate and spray-dried dispersible polymer powder and special additives. It is an ideal self-leveling material with high fluidity and plasticity, which provide a flat, perfect and solid base for laying all types of resilient flooring, carpet, wooden floor and flooring material.ect. it is nontoxic, nonhazardous and belongs to environment friendly products and widely apply to the residence,office and small business buildings such as the place of low compressive strength. Features of performance: 1. High fluidity, is capacity to extend service life and decorative effect of various floor covering 2. Easy to apply, quick setting, various floor-covering materials can be applied after short time. 3. High compressive and the tensile strength and alkali resistance. 4. Economical and practical Technical Specification(23ºC,humidity 50-55%)
Item Requirement
Appearance Grey powder
Bulk density(kg/L) 1.4kg/L
Fluidity(cm) ≥13
Working Time About 20min
Compressive Strength (MPa)≥20(after 28days)
Split Strength (MPa)≥4.0(after 28days)
Application temperature 5-30ºC
Quality Guarantee Period 6months
Theoretical application rate 6-7M2/25KG
the mixing ratio 25kg cement : 6.5kg water
Packaging Details: 25kg laminated paper bag
Application Instruction:       The surface should be clean, dry and strong without loose part. The substrate should be cleaned thoroughly. Before application of the compound the substrate should be applied by proper primer. When the primer is absorbed and the substrate is in a half-dry state, Start self leveling construction . First, mix the product with water in the mixing ratio of self-leveling cement: water=25:6.5kg. The mixing method is: pour clean water into a suitable container, then add self-leveling cement while stirring vigorously until uniform viscous mixture is formed. Pour the mixture on the area to be applied, spread the material uniformly to required thickness using toothed rake (range of thickness is 1-4mm).The mixture must be finished in 20min. It is the next step to remove entrance air by particular roller. Various flooring materials can be applied on it after dry. Notice: The product should be protected against frost and direct sun light during transportation, storage and application. Application temperature should not be lower than 5ºC. Safety and Health: The product is environment-friendly product. It is doesn't contain formaldehyde, chloride or aromatic hydrocarbon and heavy metal such as lead, mercury, cadmium at all. It is safe and nontoxic;therefore it belongs to non-hazardous goods.

Contact us if you need more details on Self Leveling Cement. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Concrete、High Fluidity and Plasticity. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Self Leveling Cement/Adhesive/Primer

Email to this supplier
  • *Subject:
  • To:

  • *Messages:
    Your message must be between 20-8000 characters